My Funny Picture

What are some funny, harmless pranks i can pull on my cousin?

K, so my cousin, who is a 22 year old male, is spending one night here on Sunday. HE lives 4 hours away, so I don't want to do anything that might take him a while to fix or get offor anything. sOme simple, funny pranks please. Thanks!

Public Comments

1. check out on youtube, nikki and johns pranks they have the funniest pranks ever, wuick and harmless :)
2. pretend u dont know him or pretend ur not home, thats wot i'd do to someone thats traveled for 4 hours :)
3. google pranks
4. •A taser made from a disposable camera with two alligator clips on the leads •A roll of electrical tape •A screw driver •A string with a loop at each end •Two thumb tacks •Small insulated copper wire with alligator clip Loosen screws holding handles in place. Take insulated wire and slide it through the door. Strip insulation off about an inch on the end that is going through the door. Tighten the screws until snug but not too tight, for the insulation will break and the tazer won’t work. Get a piece of tape and cover a section on the bottom of the handle so it’s out of sight. Tape the stripped wire to the other piece of tape but don’t cover up bare wire. Make sure you have enough wire so handle can turn. Tack string to the door. Wrap string around taser two times. Secure the other end with another tack. Take two alligator clips attached to taser and clip one to the door handle. Take the other clip and attach it to the small-insulated wire. Remove the cardboard covering of your disposable camera. Pop open the plastic body housing of the camera by using a Phillips head screwdriver. Take the circuit board out of the camera. Be careful while removing and handling the circuit board. If you touch the capacitors wires or connection points on the board you will "tase" yourself. Solder two 16-gauge wires, several inches long, to each of the two connection points connecting the flashbulb to the circuit board. Then remove the flashbulb from the circuit board. Place the circuit board back into the camera housing and close it up leaving the two added wires hanging out. Charge up your taser by pressing the flash charge button. If you wait for the flash to be fully charged the blast will be more powerful. Discharge the taser by placing the two wires on your target or in this case on a door knob and pressing the button to take a picture. Get an extension cord, cut it and strip the positive cable, then attach it to the door knob. Make sure the negative doesn't touch it or you'll short circuit and trip a circuit breaker or start a fire. When someone touches the door knob the voltage from the wall socket will shock them. Then you win.
5. hide somewhere he is. then he'll turn around an your there creepy bye the way dont get to close